Beurer BC 30 Manual De Instrucciones página 11

This could result in issues such as error
messages or the failure of the display/device.
• Avoid using this device directly next to other
devices or stacked on top of other devices, as
this could lead to faulty operation. If, however,
it is necessary to use the device in the manner
stated, this device as well as the other devices
must be monitored to ensure they are working
properly.
• The use of accessories other than those
specified or provided by the manufacturer
of this device can lead to an increase in
electromagnetic emissions or a decrease in
the device's electromagnetic immunity; this
can result in faulty operation.
• Failure to comply with the above can impair
the performance of the device.
NOTICE
• The blood pressure monitor is made up of
precision electronic components. Accuracy
of readings and the instrument's service life
depend on careful handling. Protect the unit
against hard knocks (e.g. dropping the unit),
moisture, water, dirt, dust, chemicals, extreme
hot or cold temperatures, major temperature
fluctuations, direct exposure to sunlight and
heat sources which are too close (e.g. stoves,
heating radiators). This may damage the unit.
• The device must be stored in the
specified ambient conditions. Please see
section '11. Care and Maintenance' and section
'13. Technical Specifications' for details.
• Do not use any aggressive solvents, cleaning
agents, detergents or any other strong
chemicals to clean the device.
• Never immerse and or spill water or any other
liquid onto the monitor or any components,
otherwise liquid will enter it and cause
damage.
• Do not wash the unit in a washing machine,
dish washer or tumble dryer.
• Observe the local regulations for material
disposal. Dispose of the device, components
11