Setting Date And Time - Beurer BC 30 Manual De Instrucciones

Setting date and time:

You should set the date and time without fail.
Otherwise, you will not be able to save your
measured values correctly with a date and time
and access them again later. The time is displayed
in the 12-hour format.
To set the date and time, proceed as follows:
1. After inserting the batteries:
• Following the display check, during which
all segments appear, the year flashes on the
display.
• Using the +/M button, you can increase the
basic values to be set. Set the year and confirm
the entry using the
• Now set the month using the +/M button.
Confirm using the
• Set the day/hour/minute and confirm each
using the button.
• To switch off, press the START/STOP button
.
button.
button.
2. At any time:
• Press the button to display the date/time
and current user memory.
• Press and hold the
3 seconds to reach Date and time mode.
• Set as described above.
19
button again for about