Lcd Display Information; Preparing For Measurement; Inserting/Changing Batteries - Beurer BC 30 Manual De Instrucciones

LCD Display Information:

1
13
12
11
10
9
8
7 6 5
1. Time and date
2. Systolic pressure
3. WHO classification
4. Diastolic Pressure
5. Irregular Heartbeat Indicator
6. Pulse Rate
7. Pulse Icon
8. Inflation / Deflation Indicators
9. User Number
10. Measurement Unit
11. Average of the last three measurements
12. Battery Level Indicator
13. Memory Number
2
3
4

6. Preparing for Measurement

Inserting/changing batteries:

1. Remove
the Battery
Compartment
Cover on the
left side of the
device.
2. Insert two 1.5 V 'AAA' alkaline batteries
(included) according to the polarity markings
inside the compartment.
NOTE: Do not use other types of batteries.
3. Reattach the Battery Compartment Cover.
4. Before first use, remove the clear plastic film
from the LCD Display.
If the battery change symbol
displayed, no further measurements are possible
and you must replace all batteries. Once batteries
have been removed from the device, the date and
time must be reset. Memories (if any) will not be
deleted during battery replacement.
18
is continuously