Evaluating Results; Irregular Heartbeat - Beurer BC 30 Manual De Instrucciones

If this pressure is insufficient, the device auto-
matically pumps more pressure.
• Then the pressure in the cuff is slowly
released and the pulse is detected.
• When the measurement has been taken,
the remaining air pressure dissipates very
quickly. The pulse, the systolic and diastolic
blood pressure are displayed.
• Measuring can be cancelled at any time by
pressing .
• The symbol _ appears if the measurement
could not be performed properly. Take note
of the chapter on error messages/trou-
ble-shooting in these instructions for use
and repeat the measurement.
• The device switches off automatically after
2 minutes.
Wait at least 5 minutes before taking another
measurement!

8. Evaluating Results

Irregular Heartbeat:

This device can detect irregular heartbeat patterns
during measurement and will indicate them by
displaying the irregular heartbeat indicator.
This may be an indicator for arrhythmia, which is
a condition where the heart rhythm is abnormal.
These symptoms (omitted or premature
heartbeats, slow or excessively fast heart rate)
may be caused, among other things, by heart
disease, age, physical predisposition, excessive
use of stimulants, stress, or lack of sleep.
Arrhythmia can only be ascertained through
examination by your doctor.
Repeat the measurement if the Irregular Heartbeat
Indicator displays after a measurement. Rest for
at least five minutes between measurements and
do not talk or move during measurement. If the
icon appears often, contact your doctor, since
self-diagnosis and treatment based solely on the
22