Agitator Assembly; Replacing Brushes - Panasonic MC-GG773 Instrucciones De Operación

Agitator
Holder
End Cap
Split pin
Nut
Noix
Tuerca
Belt Pulley
Poulie de
la courroie
Polea para
Agitator Holder
correa
Support de l'agitateur
Soporte del agitador
Push Off
Pousser
Empuje hacia fuera

Agitator Assembly

Brush
Spacers (3)
Brushes
Shaft

Replacing Brushes

➢ ➢ When the bristles on the agitator are
➢ ➢ Remove lower plate and agitator.
➢ ➢ Remove the nut from agitator shaft
➢ ➢ Do not bend agitator shaft or lose nut
➢ ➢ Pull agitator shaft out of agitator body.
➢ ➢ Pull, or pry out, agitator holder and
➢ ➢ Push each brush out of agitator body
➢ ➢ Install new brushes by reversing
➢ ➢ Reinstall agitator holder and agitator
➢ ➢ Reinstall the agitator shaft, washer,
➢ ➢ See exploded view for correct
Brush
Brosse
Cepillo
➢ ➢ Position belt over agitator pulley on
➢ ➢ Reinstall agitator and lower plate.
- 34 -
Agitator tube
Washer
(optional)
Agitator
Pulley
worn so that they do not touch a card
held across the lower plate, the
brushes should be replaced.
and end cap.
or washer.
agitator pulley.
as shown.
procedure.
pulley completely.
end cap and nut.
assembly of parts.
the agitator.
Nut
End Cap