Technical Specification; Installation And Operation; Positioning And Connection - Bartscher 109470 Instrucciones De Servicio

4.2 Technical specification

Name
Code-no.:
Housing:
Polishing head cloths:
Power:
Dimensions:
Weight:
Accessories:
We reserve the right to make technical changes!

5. Installation and operation

5.1 Positioning and connection

Positioning
•
Unpack the device while on the pallet and remove all packing material.
Remove the protective film from the device.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface.
•
Never leave the unit near flammable substances or gases.
•
Never leave the unit in a wet or dirty place.
•
Ensure that the unit does not come into contact with any conductive materials.
•
Ensure that the hot air exhaust does not come into contact with any liquids
(especially water), as this may damage the heater or resistor.
•
Ensure that the unit's operator has sufficient space to work.
•
Position the device in such a way that the plug is easily accessible for quick
disconnecting when required.
- 24 -
Glass polisher
109470
stainless steel
detachable microfibre
1.1 kW / 230 V~ 50 Hz
W 340 x D 305 x H 520 mm
16 kg
1 set of replacement polishing heads (5)