Possible Malfunctions - Bartscher 109470 Instrucciones De Servicio

o Remove the polishing head cloths and always wash them in tepid water (max. 30° C)
with a neutral cleaning agent. Rinse the polishing head cloths in clean water and
leave to dry at room temperature.
CAUTION!
Never use washing agents containing bleach or chlorine!
o Use only soft cloths, never use any sort of abrasive cleaning substances that could
scratch the unit's surface.
o After cleaning, use a soft, dry cloth to dry and polish the unit.

7. Possible Malfunctions

In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem
The unit is plugged
in and turned on,
but the heads with
polishing cloths do
not rotate.
Poor polishing
If you cannot remove the malfunctions:
do not open the body,
-
notify the customer service point or contact the sales
-
agent, while providing the following information:
type of malfunction;
article and serial number
(rating plate at the rear of the device).
Cause
• The unit is improperly
plugged into its socket
• The unit is damaged
• Grease or food is still on
the glass
• Cleaning agent still on glass
(or drying substance on
glasses from dishwasher)
• Dirty polishing head cloths
Solution
• Properly plug the unit into
the socket
• Contact a sales agent
• Wash and polish glasses
again
• Remove cleaning agent,
polish glasses again
• Wash polishing head cloths
- 27 -