Switching Off; Maintenance; Battery Management - Vyaire Micro I Manual De Funcionamiento

Switching Off

The unit is switched off by pressing the On/Off button.
The unit can disconnected from the mains by unplugging the charger
from the mains socket or unplugging the USB cable.

Maintenance

Battery Management

The Micro I is powered by a rechargeable battery pack. The Micro I´s
internal batteries should be fully charged on first use.
It is also necessary that if the Micro I is not in use, then it must be
recharged continuously to keep the battery alive.
A fully charged device will hold the charge for a few months.
Battery Status Icons
Battery nearly exhausted. Recharge as soon as possible to
avoid running out of charge.
Battery fully charged.
The battery is not required to hold the internal memory and stored
results will not be lost when the battery becomes exhausted.
To recharge the battery connect the Micro I to the charger provided
and then plug the charger into a suitable wall socket ensuring that
access to the charger is not restricted so that it may easily be
removed.
The Micro I will display:
71