New Patient Setup - Chattanooga Group OptiFlex 3 2090 Manual De Usuario

SETUP

NEW PATIENT SETUP

Reset Pendant
Depress the Reset on the Pendant
(i.e. paper clip, pen, etc.). With Reset
depressed, press the Mode Button.
The Unit is now ready for new patient
parameter input. Refer to pages 7 through
11.
Measuring Patient
Measure the patient from the hip joint
(greater trochanter) to the knee in
centimeters.
OptiFlex® 3 Continuous Passive Motion (CPM) Therapy Unit
14
Adjust OptiFlex Femur Component
Loosen the Thigh Adjustment Scale Knobs
on each side of the unit. Raise or lower the
unit to the measured distance. Tighten the
Thigh Adjustment Scale Knobs.
Placing Patient
Place the OptiFlex 3 unit, with Softgoods Kit
installed, under the patient's leg.
Align patient's knee with the unit hinge.