Control Panel - JENN-AIR JER8885 Guía De Uso Y Cuidado

O C
VEN OOKING

Control Panel

A B
I
The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes Convect and other model specific features. (Styling may vary depending on model.)
A Keep Warm Use to keep cooked food warm in oven.
B Clean Use to set self-clean cycle.
C Convect Bake Use for convection baking.
(select models)
D Convect Roast Use for convection roasting.
(select models)
E Bake Use for baking and roasting.
F Broil Use for broiling and top browning.
G Delay Programs the oven to start baking or
cleaning at a later time.
H Number Pads Use to set time and temperature.
I Oven Light Use to turn the oven light on or off.
J Drying Use for drying fruits, vegetables, herbs,
(select models) etc.
K Proofing Use to raise yeast-based bread products
(select models) before baking.
L Timer Sets the timer.
M Clock Use to set time-of-day clock.
N Cook & Hold Bakes for a preset time, then holds food
warm for 1 hour.
O Favorite Use to set and save a specific Cook
& Hold procedure.
P Autoset Use to quickly set temperature.
Q CANCEL Cancels all operations except Timer and
Clock.
8113P417-60B 10
C D E F
J K L M
G
N O
Using the Touchpads
•
Press the desired pad.
•
Press the number pads to enter time or temperature.
• Press the Autoset 0 pad to enter temperature.
•
A beep will sound when any pad is touched.
•
A double beep will sound if a programming error occurs.
Note: Four seconds after entering the number, the time or
temperature will automatically be entered. If more than 30
seconds elapse between touching a function pad and the
number pads, the function will be canceled and the display
will return to the previous display.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to 24-hour format:
1. Press and hold the CANCEL and Favorite
pads for three seconds.
• 12 Hr flashes in the display.
2. Press the Autoset 0 pad to select 24 Hr;
press again to select 12 Hr.
3. Set the time of day following the directions
in the To set the Clock section.
9
9/28/04, 11:40 AM
H
P Q