Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
C to exit
Enter confirm
If you do not want to wash the coffee group,
press the
Esc
key. To run the coffee unit wash
place a glass on the tray and press the
button.
The display shows::
12
Open lever
Close lever
Open and close the capsule loading lever and
press the
Enter
button. The mixer wash be-
gins. After the release of about 100 cc of water
washing is over and the machine is ready.
Press the
Esc
button two times to exit the
13
Run washing
and return to the
.
user
MENU USER >> ENERGY SAVING
The machine is programmed to be able to go
into a power saving mode after a certain period
of inactivity. The value can be changed. To bring
the machine into ready condition, open/close the
capsule loading lever or push any button.
Select the
button using the
1
Energy Saving
Down
buttons and pressing the
Menu user
Energy saving
In the
environment, the fol-
Energy saving
lowing items are present:
NO
YES
MENU USER >> ENERGY SAVING >> NO
With this setting, the machine never goes into
power saving mode.
Select the item
using the
2
NO
tons and pressing the
Enter
button.
Energy saving
NO
Press the
Enter
button to confirm.
3
NO
Press enter
The default value is restored.
NO
Executed
Press the
Esc
button to return to the
4
environment.
ergy saving
MENU USER >> ENERGY SAVING >> YES
With this setting, the period of inactivity is deter-
mined (expressed in hours) after which the ma-
chine enters into energy saving mode.
Select the item
using the
5
YES
tons and pressing the
Enter
button.
MACHINE PROGRAMMING
Energy saving
Yes
Use the
6
tivity period
Enter
should be in energy saving mode and press
the
Enter
Yes
En.sav.dly
Press the
7
saving
environment and return to the
.
user
Use the
Up/Down
8
menus (
Menu technician/Menu loader
or press the
Menu
gramming environment.
MENU TECHNICIAN
The Menu technician is an environment
dedicated to technical service personnel
with specific competence for any access it is
necessary to enter the password. To modify
it, access the
set menu
Up/
The default password is
Enter
button.
MENU TECHNICIAN >> PASSWORD
Select the
1
Up/Down
button.
Menu
Technician
The display will flash five icons showing
2
the 5-digit numeric password. Set the de-
sired number by pressing the
buttons and confirm with Enter. Repeat
Up/Down
but-
the operation for all five boxes.
Password?
Keep your password in a safe place.
A lost password requires a reset of the machine' s
software and means the loss of all settings other
than the manufacturer' s settings.
The display shows the
3
vironment.
Menu technician
Parameters
In the
Menu technician
En-
are present:
Parameters
Powder calibration
Selections
Data reading
Password set menu
Language
Credits
Fan management
Up/Down
but-
Layout
Up/Down
buttons to set the inac-
000
after which the machine
button to confirm the choice.
000h
Esc
button to exit the
Energy
Menu
buttons to return to other
button to exit the pro-
MENU
Menu technician >> Pw
.
00000
.
Menu technician
item using the
buttons and pressing the
Enter
Up/Down
00000
Menu technician
the following items
MENU TECHNICIAN >> PARAMETERS
Select the
Parameters
1
Down
buttons and pressing the
Menu technician
Parameters
In the
Parameters
ing items are present:
Coffee temperature
Solubles temperature
Pre-time solubles
Post-time milk
Post-time chocolate
MENU TECHNICIAN >> PARAMETERS >>
COFFEE TEMPERATURE
Select the
Coffee temperature
2
)
ing the
Up/Down
the
Enter
button.
Parameters
Coffee temp.
To change the temperature in the coffee
3
boiler (110 in this example) use the
Down
buttons and press
Parameters
Coffee temp.
Press the
Esc
button to return to the
4
rameters
environment.
MENU TECHNICIAN >> PARAMETERS >>
SOLUBLES TEMPERATURE
Select the item
Solubles temperature
5
ing the
Up/Down
buttons and pressing the
Enter
button.
Parameters
Solub.temp.
To change the temperature in the soluble boiler
6
(090 in this example) using the
tons and pressing
Enter
Parameters
Solub.temp.
MENU TECHNICIAN >> PARAMETERS >>
PRE-TIME SOLUBLES
The
Pre-time solubles
en-
time between the beginning of the dose counter
and the beginning of the soluble power dispens-
ing and is expressed in hundredths of seconds
(cs).
Select the item
Pre-time solubles
10
the
Up/Down
buttons and pressing the
button.
Parameters
Pre - solub
To change the
Pre-time solubles
11
in this example) use the
and press
Enter
to confirm.
E N
item using the
Up/
Enter
button.
environment, the follow-
item us-
buttons and pressing
Up/
Enter
to confirm.
110
Pa-
us-
Up/Down
but-
to confirm.
090
item indicates the
using
Enter
item (060
Up/Down
buttons
23
Publicidad
Capítulos
Tabla de contenido
