Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Chocolate
Chocolate
090cc
To change the amount of powdered choc-
25
olate used to prepare the
, select the
item using the
Chocolate
tons and pressing Enter. Change the quan-
tity (020 gc in this example) using the
Down
buttons and pressing
Chocolate
Choco powd
020gc
Press
Esc
to return to the
26
ronment.
TECHINICAL MENU >> SELECTIONS >> HOT
BEVERAGES (with capsules)
To change the amount of water used to pre-
27
pare the
Hot Beverages
item using the
Beverages
tons and pressing Enter. Change the quan-
tity (080 cc in this example) using the
Down
buttons and pressing
Hot beverages
Water
080cc
Press
Esc
twice to return to the
29
technician
environment.
MENU TECHNICIAN >> DATA READING
The machine memorizes the number of dispen-
sations made by each key, the number of liters
of water dispensed and the number of hours the
machine is on. In the data reading environment,
it is always possible to read such data.
Select the
item using the
1
Data Reading
Down
buttons and pressing the
Menu technician
Data reading
In the
Data Reading
environment, the fol-
lowing items are present:
The combination
N#
followed by the key
number (
1 to 8
) allows us to know the number
of dispensations made by the corresponding key.
To match the number with the beverage refer to
LAYOUT.
N#1 (or the subsequent N#2, N#3,
N#4, N#5, N#6, N#7, N#8)
Number of liters of water (N.lt.water)
Number of hours ON (N.hours ON)
MENU TECHNICIAN >> DATA READING >>
NUMBER OF DISBURSEMENTS
Select the item corresponding to the desired
2
key (in this example
N#4
) using the
buttons. The number is visible on the display
(in the example 732).
Data reading
N 4
0732
26
MACHINE PROGRAMMING
MENU TECHNICIAN >> DATA READING >>
NUMBER OF LITERS OF WATER
Select the
3
ing the
ers is visible on the display.
Chocolate-
Data reading
Powdered
N.lt.wat
Up/Down
but-
Up/
MENU TECHNICIAN >> DATA READING >>
Enter
again.
NUMBER OF HOURS ON
Choose the
4
ing the
ible in the display.
envi-
Selections
Data reading
N.hrs ON
Press
5
technician
, select the
Hot
MENU TECHNICIAN >> PASSWORD SET
Up/Down
but-
MENU
Up/
In the
Enter
again.
items present that correspond to two distinct and
obligatory passwords, which allow access to the
two password-protected environments:
technician
Select the item
1
Menu
the
Up/Down
button.
Menu technician
Pw set menu
In the
items are present:
Technical
Loading
Up/
Select the entry relative to the environment
2
Enter
button.
you want to change using the
tons and pressing the
Pw set menu
Technician
Pw set menu
Loader
On the display, 5 icons appear which repre-
3
sent a 5-digit numeric password. The first
box will flash. Set the desired number (exam-
ple 3) by pressing the
confirming with Enter, which then flashes to
the next.
Repeat for all five boxes.
Pw set menu
Up/Down
To confirm the password set (example 34567),
4
press the
Execute?
Number of liters of water
Up/Down
buttons. The number of lit-
0000
Number of hours ON
item us-
Up/Down
buttons. The hours are vis-
0000
Esc
twice to return to the
environment.
there are two
Password set menu
and
Menu loader
.
Password set menu
buttons and pressing the
Password set menu
the following
Up/Down
Enter
button.
Up/Down
buttons and
30000
Enter
button.
34567
To confirm press the
5
us-
34567
Press
Esc
to return to
6
environment.
You must enter the password each time you want
to re-enter the Menu technician or the Menu
loader.
Keep your password in a safe place.
Loss of the password carries the reset of the soft-
ware of the machine and the loss of all settings
other than the manufacturer' s settings.
MENU TECHNICIAN >> LANGUAGE
Select the
1
Language
Down
buttons and pressing the
Menu
button.
Menu technician
Language
In the
Language
items are present:
Italiano
English
Menu
Française
Deutsch
Español
using
Português
Enter
Nederlandse
Select the item corresponding to the language
2
to be used by using the
and pressing the
Enter
Language
English
On the display a message indicates that the
choice has been memorized.
but-
English
Press
Esc
twice to return to the
3
technician
environment.
MENU TECHNICIAN >> CREDITS
Select the
Credits
1
buttons and pressing the
Menu technician
Credits
In the
Credits
environment, the following
items are present:
Credit control
Credits alarm
MENU TECHNICIAN >> CREDITS >> CREDITS
CONTROL
Select the
2
Credit control
Up/Down
buttons and pressing the
button.
Credits
Credit contr.
Enter
button again.
Executed
Menu technician
item using the
Up/
Enter
.
environment, the following
Up/Down
buttons
button.
Executed
Menu
item using the
Up/Down
Enter
button.
item using the
Enter
Publicidad
Capítulos
Tabla de contenido
