CLEANING THE DISPENSING
NOZZLE
Remove the nozzle by pulling it down.
1
Press the tab and pull out the inside of the dis-
2
pensing nozzle.
Wash the dispensing nozzle with warm water,
3
then reinstall it with the same movements in
reverse and check the correct position.
ALARM MESSAGES TO DISPLAY
1 2 3 4 5 6 7 8
MACHINE STATUS
LAYOUT
1
Capsule drawer full
(30 capsules)
2
Open drawer with the
1 / 2
machine in temperature
Water missing in the tank
1 / 2
or the tank is missing
Reinsert drip tray/used
1 / 2
capsules drawer
Solubles door open
1 / 2
Capsule blocked
1 / 2
MAINTENANCE AND CLEANING
CLEANING THE DRIP TRAY/USED
CAPSULES
Remove the drip tray/used capsules.
1
Lift and remove the used capsules container.
2
Lift and remove the cup tray.
3
SOUNDS EVENTS
The delivery of solubles
is possible.
It is not possible to
make disbursements.
Continuous intermit-
tent sound.
It is not possible to
make distributions.
Remove the float on the cup tray.
4
Lift and remove the container that collects liq-
5
uids.
Wash the parts with cold or warm water, then
6
dry them and put them back properly.
TECHNICAL CHARACTERISTICS
For the technical characteristics, refer to the data plate on
DISPLAY
the machine.
LAVAZZA EP-PLUS
· Voltage: 220-240 V, 50/60 Hz
Drawer full
· Total strength: 1680-2000 W
LAVAZZA EP-PLUS
· Tank capacity: 4 l
Drawer open
· Weight: 18,7 kg
LAVAZZA EP-PLUS
· Material used for the body: thermoplastic
Water missing
· Used capsule drawer capacity:
LAVAZZA EP-PLUS
**READY**
· Dimensions: Height 610 mm
Insert capsule
ATTENTION!
Door open
Capsule blocked
Open lever
2006/42 CE – 2004/108 CE – 2006 /95 CE
E N
30 single-dose Espresso Point capsules
Width 276 mm
Depth 366 mm
31