Levenhuk DTX 500 Mobi Manual De Instrucciones página 2

Levenhuk DTX 500 Mobi
Digital Microscope
EN
Microscope parts
Shutter button
Zoom adjustment wheel
RCA socket
USB socket
Power cable socket
LEDs
Objective lens
Tripod threaded hole
The kit includes: microscope, tripod, rechargeable battery, power cable, USB cable,
RCA cable, Levenhuk DTX installation CD, pouch, wrist strap, cleaning cloth, user guide.
Microscope assembly
Open the battery compartment and insert the battery into the battery compartment matching
the indicated polarity. The battery has to be fully charged before turning the microscope on for
the first time. Plug the power cable into the power cable socket on the microscope body (5) and
connect it to a power source. The battery status indicator (23) will turn red. Once the battery is
fully charged, the indicator will go out. You can now disconnect the microscope from the power
source and turn it on. The fully-charged battery allows you to use the microscope for two hours.
The illumination will grow dim and the image quality will decrease to inform you that the battery
is low. Charge the battery, as described above.
A MicroSD card (purchased separately) is required to save captured images and recorded videos.
Turn the microscope off and insert the MicroSD card into the corresponding slot on the
microscope body until it locks in place with a click. Do not apply excessive force when inserting
the MicroSD card. Try rotating the card, if it does not lock in place with ease. Format the card
before using it.
To turn the microscope on, open the LCD display or press the power button (20). To turn the
microscope off, fold the LCD display or press the power button (20) again (refer to Power saving
2 section for more information).
MicroSD card slot
Wrist strap clip
Focus wheel
Brightness adjustment wheel
Battery compartment
LCD display
▲ (color mode switch and scrolling)
Menu
Never, under any circumstances, look directly at the Sun,
another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE
and may lead to BLINDNESS.
OK
▼ (DOWN)
◄ (LEFT/ BACK)
Power button
Speaker
Microphone
Battery status indicator
00013/01618
5.0М
Image capture mode icon
Sequence capture mode icon
Captured image counter/Total number
of images that may be captured
(based on the current resolution)
MicroSD status icon
Current image resolution
Battery status indicator
Note: interface icons may be hidden by pressing
the magnification adjustment wheel (9).