DeWalt DW733 Manual De Instrucciones página 22

E N G L I S H
Follow the depth of cut and width guidelines shown in the table below.
2.5
0.5
0.8
0
20 50 100
Width of stock (mm)
• Feed the workpiece in the direction of the grain (fig. G).
Snipe
Snipe is a depression made when the ends of the workpiece contact the
cutters. To avoid snipe:
• Make sure the extension tables are level with the main table.
• Keep the workpiece level throughout the planing operation.
• Feed the workpiece flat against the tables.
Warping (fig. H1 - H4)
If your workpiece is only slightly warped, plane both sides to produce the
desired thickness.
Bowed workpieces (fig. H1 & H2)
The feed rollers and cutterhead will temporarily flatten the workpiece (fig. H1).
The bowed shape, however, will return after planing (fig. H2).
• To remove the bow, use a jointer.
Cupped workpieces (fig. H3 & H4)
• Rip the cupped workpiece in the middle (fig. H3).
• Plane the pieces separately to eliminate waste.
• Alternatively, plane the top flat (37) first, turn the workpiece over and
plane the bottom flat (38) (fig. H4).
Dust extraction (fig. A2 & J)
• Mount the dust extraction adaptor (13) using the screws (39).
• Insert the reduction bush (40) as shown.
• Whenever possible, connect a dust extraction device designed in
accordance with the relevant regulations regarding dust emission.
Transporting (fig. A1 & A2)
• When transporting your DW733, always carry it by the carrying handles (4)
or handholds (7).
• When transporting or storing your machine, use the cord wrap (11) to
keep the cord in place.
Maintenance
Your D WALT Power Tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Resharpening the blades
The blades can be resharpened at 42°.
en - 5
Softwood
Hardwood
150 200 250 300
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft
cloth.
• Keep the tables clean and free from grease. Regularly apply some wax
to the tables.
• Keep the machine free from dust and shavings.
Unwanted tools and the environment
Take your tool to an authorized D
disposed of in an environmentally safe way.
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT machine, simply return it within 30 days, complete as
E
purchased, to a participating Dealer, or an authorized D
agent, for a full refund or exchange. Proof of purchase must be
produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for Power Tools.
Excludes accessories.
• ONE YEAR WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual.
WALT repair agent where it will be
E
GUARANTEE
WALT repair
E
WALT machine, in the
E
WALT repair agent,
E
16