VONROC S2_RS501DC Traducción Del Manual Original página 8

EN
TECHNICAL SPECIFICATIONS
Model No.
Rated voltage
No load speed
Saw stroke
Max. saw capacity wood
Max. saw capacity steel
Weight
Sound pressure level L
Sound power level L
WA
Vibration 'sawing wooden beam' 16.844 m/s
Vibration 'sawing plywood'
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Only use the following batteries of the VONROC VPO-
WER 20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CD801AA
CD803AA
The following charger of the can be used to charge
these batteries.
CD802AA
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
8
S2_RS501DC
20V
0-3000/min
22mm
100mm
10mm
1.57 kg
82.2 dB(A), K=3dB(A)
PA
93.2 dB(A), K=3dB(A)
K=1.5 m/s
2
18.067 m/s K=1.5 m/s
2
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD802AA
220-240V,50Hz 0.4A
21V 2.5A
60 minutes
120 minutes
CD801AA, CD803AA
0.36 kg
20V, 2Ah Lithium-Ion
20V, 4Ah Lithium-Ion
Quick charger
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
2
Protect yourself against the effects of vibration by
2
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Lock-off button
2. On/Off button
3. Handle
4. Battery
5. Battery unlock button
6. Auxiliary handle
7. Baseplate
8. Chuck
9. Clamping lever
10. Hex key
11. Baseplate bolts
12. Worklight
13. Battery LED indicators button
14. Battery LED indicators
15. Charger
16. Charger LED indicators
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first
use.
Inserting the battery into the machine (Fig. A, F)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
WWW.VONROC.COM