Product Description; Specifications - Shindaiwa C242/EVC Manual Del Proprietário

Product Description

Using the illustration as a guide,
familiarize yourself with your
machine and its various com-
ponents. Understanding your
machine helps ensure top perfor-
mance, long service life and safer
operation.
Gearcase
Brushcutter
blade
Engine model
Dr y weight (less attachment)
Engine type
Bore x stroke
Displacement
Maximum power
Recommended idle speed
Fuel/oil ratio
Carburetor type
Fuel tank capacity
Ignition
Spark plug
Electrode Gap
Torque
Air cleaner type
Starting method
Stopping method
Transmission type
Handle Type
EPA Emission Compliance Period**
Specifications are subject to change without notice.
C242
Ignition
Throttle
Outer tube
Cutting attachment
shield
50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil*
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating
hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours
(Intermediate) and A = 300 hours (Extended).
* The NGK BPMR6A also meets the requirements for electro magnetic compliance (EMC).
Throttle
interlock
Strap
Hanger
Handlebar
these units or their components.
SF242E
5.7 kg / 12.6 lb
2-cycle catalyst
33 x 28 mm / 1.3 x 1.1 in.
23.9 cc / 1.5 cu. in.
1.0 HP/0.8 kW @ 8000 min -1
3,000 (±250) min -1 (rpm)
Walbro WYK, diaphragm-type
670 mL / 22.3 oz
One-piece electronic, transistor contolled
NGK BPMR6A
0.6 - 0.7 mm / .024 -.028 in.
170 - 190 kg cm / 16.7 - 18.6 N∙m
Foam, non reversible
Recoil
Slide switch
Automatic, centrifugal clutch w/bevel gear
Bicycle type
Category A
Spark plug
Fuel tank
WARNING!
Do not make unauthorized
(rpm)
5