FUNCIONALIDAD DE LA BORNA 9E.
FUNCTION OF TERMINAL BLOCK 9E.
instaladas en cada acceso común deberán
interconectarse entre si sólo mediante la borna
9E.
BLOCK OF DWELLINGS 1
Block 1 street panel
Common wires (Block 1)
Terminal block 9E of A2410 groups is used in
installations with several blocks of dwellings with
common accesses to all of them. As many street
panels are installed in common accesses as blocks
Las placas calle
of dwellings there are in the installation. The street
panels installed in each common access will
interconnected with each other only by means
of terminal block 9E. In this way, simultaneous
activation of two communication lines from the same
common access will be avoided.
If there is a call to a block of dwellings from a common
access, only the street panel of the block of dwellings
and the street panels of the common accesses will
go into busy status. It will be possible to make calls
to dwellings in other blocks via their own street
panels.
An example diagram of an entryphone with two
blocks of dwellings and one common access is
shown below:
COMMON ACCESS
BLOCK OF DWELLINGS 2
Common wires (Block 2)
Block 2 street panel