Publicidad
En el caso de videoportero, su funcionamiento
es el siguiente:
GRUPO CONTROL AUDIO A2410.
The configuration options by means of micro-switches are the following:
Microinterruptor 1 (MAIN / SEC):
Micro-switch 1 (MAIN / SEC): This configures the street panel as Main (MAIN) or
Secondary (SEC). In any installation, one street panel will be configured as being
the main one and the rest as secondary ones. The main street panel will be the
access selected by default when unhooking the telephone or when performing video
surveillance from a dwelling. Secondary street panels have a different call tone from
that of the main street panel.
In the case of the video entryphone, it works in
the following way:
1. When receiving a call, the image appears instantly
on your monitor.
2. While you see the visitors, these are not warned
about your presence in the dwelling until audio
contact is established.
3. To establish audio contact unhook the telephone.
The image timer will restart when the telephone is
unhooked.
4. The image will be disconnected 40 seconds after
starting. The image is also turned off by hanging up
the telephone or by pressing the on/off button
5. The door is opened by pressing the door opener
pushbutton
.
6. To perform video surveillance, press the on/off
button
. Video surveillance will automatically end
40 seconds after it is initiated, or by once again
pressing the on/off button
7. For other applications it has a supplementary
potential-free pushbutton
8. It has brightness and colour adjustments to achieve
an appropriate image quality.
AUDIO CONTROL GROUP A2410.
.
.
.
Publicidad
