EJEMPLO DE DISTRIBUCIÓN DE SEÑAL DE VÍDEO EN INSTALACIÓN
DE PAR TRENZADO CON DISTRIBUIDORES.
EXAMPLE OF VIDEO SIGNAL DISTRIBUTION IN A TWISTED PAIR
INSTALLATION WITH DISTRIBUTORS.
Specific 4-brach distributors ref. M1924 twisted pair cable will be used.
Special care must be taken when configuring the bridge in each wall base (see page 16). The closure
resistance will be cut in all distributors in which the video cable enters and exits towards another
J2 (100 ohm)
M1720D
J2 (100 ohm)
M1720D
J2 (100 ohm)
M1720D
Do no shut-off the
resistance
M1924
Shut-off the
resistance
M1924
From the camera group G1820D
POWER SUPPLY CABLE
CAT.5 TWISTED PAIR CABLE (100 ohm)
J2 (100 ohm)
M1720D
Connect to common wire No. 5
J2 (100 ohm)
M1720D
J2 (100 ohm)
M1720D
Connect to common wire No. 5
distributor.