Pole Saw Information; Pole Saw Assembly - Remington RM0815P Manual Del Usario

poLE Saw INForMatIoN

poLE Saw aSSEMBLY

rpS2N1
The hardware bag contains the following items:
• (1) Handle Bracket
• (1) Knob
• (1) .250" Lock Washer
❶
Step – Squeeze trigger
1a
Push in and hold trigger lockout
button.
❷
Step – Insert pole Bracket into
Saw
2a
Continue to hold trigger while
completing step 2B.
2B
Insert pole bracket into saw. Note: Pole
Bracket holds trigger in "ON" position.
1B
Squeeze and hold
trigger.
1
❸
Step – attach Handle Bracket
to pole Bracket
3a
Slide handle bracket onto
clamping bolt.
3B
Clamping bolt should extend through
handle bracket.
❹
Step – Secure Handle Bracket
to pole Bracket
4a
4B
Thread knob onto clamping bolt. Note:
After knob makes contact with handle
bracket, tighten 1
❺
Step – connect to power cord
Plug saw power cord into receptacle cord at end
of inner pole.
Place lockwasher onto
clamping bolt.
/ to 2 more turns.
1
2