Pole Saw Information; Pole Saw Assembly - Remington RM0815P Manual Para El Usuario

POLE SAW iNFORMATiON
POLE SAW ASSEMBLY
RPS2N1
The hardware bag contains the following items:
* (1) Handle Bracket
* (1) Knob
* (1) .250" Lock Washer
Step O = Squeeze Trigger
Squeeze and hold
j _ trigger.
/
Q ush in and hold trigger lockout
button.
Step _ = insert Pole Bracket into
Saw
O ontinue to hold trigger while
completing step 2B.
/'
/'
O nsert pole bracket into saw. Note: Pole
Bracket holds trigger in "ON" position.
Step _=7 -Attach Handle Bracket
to Pole Bracket
O lide handle bracket onto
clamping bolt.
Clamping bolt should extend through
handle bracket.
A
Step _ = Secure Handle Bracket
to Pole Bracket
Place Iockwasher onto
clamping bolt.
O Thread knob onto bolt. Note:
clamping
After knob makes contact with handle
bracket, tighten 1 1/2 to 2 more turns.
Step _ = Connect to Power Cord
Plug saw power cord into receptacle cord at end
of inner pole.
\
17