Tabla de contenido
Publicidad
4 .
Watching through the clear processing bowl, attach the base of the crushing auger through
the processing bowl's center hole and over the motor base spindle . (See Figure 4 . ) Make sure
the crushing auger drops down and rests flush against the bottom of the processing bowl .
When securely attached, the crushing auger will not turn on the motor base .
5 . Add the juice strainer over the crushing auger . (See Figure 5 . ) The groove in the bottom
of the juice strainer lines up and locks over the locking ring in the bottom of the processing
bowl . When securely attached, juice strainer will not turn on the motor base .
fIGURE 4
fIGURE 5
Auger
Juice Strainer
Groove
Motor Base
Locking Ring
Spindle
8
SO-309848_BELLA NutriPro_IM_r5.indd 8
12-09-04 2:18 PM
Publicidad
Tabla de contenido
