Storing Instructions - Bella NUTRIPRO Manual De Instrucciones

6 . Rinse the crushing auger in warm running water . Use the cleaning brush to remove any debris
from the base of the auger .
7 . Rinse the processing bowl in warm running water . Use the handle of the cleaning brush to help
clear pulp from the spout; rinse well .
8 . Wipe the exterior of the motor base with a damp sponge, cloth, or paper towel . Use any mild
liquid dish washing detergent but DO NOT use products containing ammonia or scouring
powders . These products will dull, scratch or mar the surface .
9 . If any juice has spilled under the Cold Press Juicer or either of the handled cups, clean legs
and countertop area with a lightly soaped sponge, then dry .
10 The Cold Press Juicer's food pusher, lid, stainless steel juice strainer, crushing auger, processing
bowl, 2 handled cups and cleaning brush may be washed in the top rack of a dishwasher .
However, a light scrubbing with the cleaning brush and mild dish washing soap in warm
(not hot) tap water and a thorough rinse after each use should be sufficient .

sToRInG InsTRUCTIons

1 . Unplug the Cold Press Juicer . Following the Assembly Instructions described in this Instruction
Manual, assemble clean, dry parts before storing .
2 . Store the food pusher in the hopper of the lid .
3 . Store the Cold Press Juicer in its box in a clean, dry area .
4 . Do not put any stress on the cord where it enters unit, as this could cause cord to fray and break .
15
SO-309848_BELLA NutriPro_IM_r5.indd 15 12-09-04 2:18 PM