Tabla de contenido
Publicidad
DIsassEMblY InsTRUCTIons
WARNING: ALWAYS MAKE SURE THE COLD PRESS JUICER IS UNPLUGGED
BEFORE STARTING DISASSEMBLY.
1 .
The lid is locked when the locking tab is fully inserted into the handle slot in the upper rim
of the processing bowl and perfectly aligned with the black bar . Holding the Cold Press Juicer
firmly by the motor base handle in one hand, grasp the hopper in the other hand and turn the lid
counter-clockwise to unlock . (See Figures 6 and 7 . ) Remove the lid for cleaning .
2 .
Lift the stainless steel juice strainer up and out of the processing bowl . Rinse in warm running water .
3 .
Grasp the crushing auger firmly and pull straight up and out of the processing bowl .
Rinse immediately in warm running water .
4 .
Use gentle pressure to
lift the processing bowl
up and off the 4 bowl
locks on the motor base .
Rinse immediately in
warm running water .
5 .
Follow the procedures
outlined in the Care
and Cleaning Instructions
for
specific
instructions .
CAUTION:
Use care when handling .
13
SO-309848_BELLA NutriPro_IM_r5.indd 13
fIGURE 6
cleaning
fIGURE 7
Locking Tab
Handle Slot
Black Bar
12-09-04 2:18 PM
Publicidad
Tabla de contenido
