When the maximums or minimums are displayed, press and hold the
to reset both records
and it will start to record the maximums and minimums again.
IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY
When the outdoor temperature and humidity digits show '---", the wireless transmission is either
interrupted or lost. Press and hold the
/ CHANNEL button to start searching for the signal from the
outdoor transmitter with the
flashing.
If you continue to lose the outdoor temperature and humidity display, which could happen in extreme
cold weather, try placing the transmitter in a different location until you have smooth transmission of
temperature / humidity data.
HOW TO SYNCHRONIZE YOUR WEATHER STATION WITH ANOTHER OUTDOOR
TRANSMITTER
1. Press
/ CHANNEL at the back of your weather station,
icon appears under your outdoor
temperature and humidity.
2. Press and hold
/ CHANNEL until the
icon blinks, your weather station is searching for the
signal of another outdoor transmitter at Channel 2.
3. Slide open the battery door of your second transmitter, slide the switch to the middle position
marked with 2, then insert two AAA batteries into the battery compartment by observing the correct
+/- polarity.
Replace the battery cover.
4. The outdoor temperature and humidity of your second transmitter will appear on the LCD together
with
icon within few seconds. If the data still does not appear, press RESET at the front of your
second transmitter once.
5. To synchronize your weather station with a third outdoor sensor, repeat the same step by choosing
on your weather station and select 3 on your third transmitter.
AUTO SCROLLING THE OUTDOOR TEMPERATURE AND HUMIDITY OF
DIFFERENT TRANSMITTER
Press
/ CHANNEL frequently until the
icon flashes. Then the outdoor temperature and humidity
of different outdoor transmitter will be displayed for few seconds alternately with
,
,
flashing.
To stop the auto scrolling, press
/ CHANNEL once to go back to constant display of the temperature
and humidity of the
transmitter, the
icon remains static on the display.
LOW BATTERY INDICATION OF YOUR OUTDOOR TRANSMITTER
The
icon will appear to indicate the battery level of your outdoor transmitter is getting low. You may
need to replace the batteries of your outdoor transmitter with new ones.
Extreme cold weather (e.g. below 14 °F) will also cause low battery voltage.
EN. 8