Safety; General Safety Precautions; Specifi C Safety Precautions - Becker BOM 850C-II Manual De Instrucciones

Safety

General safety precautions

Warning:
Make sure that you read this manual and that you understand its contents before you start working
with the product.
Warning:
Keep this manual with the product for future reference.
1. Obey the instructions in this manual. Incorrect installation or incorrect use can cause serious injury or damage
to the product.
2. Any damage or injury as a result of not following the instructions in this manual will render the manufacturer's
liability null and void.
3. Only use the product for the intended use as mentioned in this manual.
See CE declaration.
4. Please also see the safety instructions for operation (see Operation, Page 47).
5. Installation must only be carried out by qualifi ed technicians.
Specifi c safety precautions
6. The product runs on high voltage. Before you start work on electrical systems, do the following:
1. Make sure that the product is disconnected from the electrical power supply.
2. Make sure that the power cannot be reconnected unintendedly during work on the electrical system.
7. Never make any modifi cations or changes to the product that have not been expressly approved by the
manufacturer.
8. The design and execution of the product based on this corresponds to state-of-the-art technology.
9. Only use genuine spare parts of the manufacturer. Wrong or faulty spare parts can cause damage,
malfunctions or even a total failure of the product.
Safety
31