Becker BOM 850C-II Manual De Instrucciones página 40

Installation
Delete a transmitter
Delete a single transmitter
Note: The taught master transmitter cannot be deleted. It can only be overwritten.
1. Press the teach button (II) at the master transmitter for 3 seconds.
The LED (III) lights up once for acknowledgement.
2. Press the teach button of the transmitter to be deleted for 3 seconds.
The LED (III) lights up once for acknowledgement.
3. Then press the teach button of the transmitter to be deleted once again for 10 seconds.
The LED (III) lights up twice for acknowledgement.
The transmitter has been deleted from the radio receiver.
Delete all transmitters (except for master transmitter)
1. Press the teach button (II) at the master transmitter for 3 seconds.
The LED (III) lights up once for acknowledgement.
2. Press the teach button (II) at the master transmitter once again for 3 seconds.
The LED (III) lights up once for acknowledgement.
3. Press the teach button (II) at the master transmitter once again for 10 seconds.
The LED (III) lights up twice for acknowledgement.
All transmitters (except for the master transmitter) have been deleted from the radio receiver.
Overwrite the master transmitter
1. Press the teach button on the radio receiver (I) for 3 seconds.
The LED (III) fl ashes and the radio receiver is ready for teaching for 3 minutes.
2. Press the teach button of the new master transmitter for 10 seconds.
The LED (III) goes out for acknowledgement.
The new master transmitter has been taught and the old master transmitter has been overwritten.
40