HeiTel CamServer 2c Guía De Instalación Rápida página 24

HeiTel Digital Video GmbH - Quick Installation Guide CamServer 2c
Selected options for
parameter settings
Transmitting
parameters
3G/UMTS
parameterisation
Overview of
parameters
24
Parameter settings for the device
After establishing the connection to the device, click on the Setup button to
open the Recorder settings dialogue window.
User rights: User
■
Network settings: Connections\Network (TCP/IP)
■
3G/UMTS parameterisation (only with 3G/GPS
■
Connections\Wireless
connection of the device (only CamServer 2c with 3G/GPS Module)" on
page 24)
Dialling number for alarms: Connections\Phone & IP numbers
■
HTconnect parameterisation: Connections\HTconnect
■
Arming and alarms: Alarms and sub-points
■
Recording options, archive passwords etc.: Site
■
To conclude parameter settings, confirm the change made using OK, so that
the data is transmitted to the device.
For detailed information on device parameterisation, if necessary please
consult Chapter 7 of the CamControl
Parameterisation of 3G/UMTS connection of the device
(only CamServer 2c with 3G/GPS Module)
After establishing the connection to the device, click on the Setup button to
open the Recorder settings dialogue window. To parameterise the 3G/
UMTS, select the menu Connections\Wireless
The 3G/UMTS modem
manufacturer and type
will appear in the upper
status window. In
addition you will be
notified whether a
connection to the
provider exists.
The graphic below
shows information on
the signal quality and/
or the power level.
PIN (Personal Identification Number): The PIN is required depending on the
■
parameterisation of the SIM (Subscriber Identity Module) card.
User name: This setting is provider-dependent.
■
Password: This setting is provider-dependent.
■
APN (Access Point Name): The APN access data should normally be in the
■
following order: 1,"IP","<PROVIDER APN>"
Example data for German providers:
Vodafone:1,"IP","web.vodafone.de"
■
T-Mobile: 1,"IP","internet.t-d1.de" or 1,"IP","internet.t-mobile"
■
Module):
WAN (see "Parameterisation of 3G/UMTS
Archive and sub-points
LITE software manual.
WAN.
CamServer 2c