Fcc Compliance Statement; Industry Canada Statement - DSC TL280 Manual De Instalación

FCC Compliance Statement

CAUTION: Changes or modifications not expressly appro-
ved by the Digital Security Controls could void your autho-
rity to use this equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the ins-
tructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
- Re-orient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/television techni-
cian for help.
The user may find the following booklet prepared by the FCC
useful: 'How to Identify and Resolve Radio/Television Interfe-
rence Problems'. This booklet is available from the U.S. Gover-
nment Printing Office, Washington D.C. 20402, Stock # 004-
000-00345-4.
© 2014 Tyco International Ltd. y sus compañías respectivas. Todos los derechos reservados.
Toronto, Canadá • www.dsc.com
Soporte técnico: 1-800-387-3630 (CA, US), 905-760-3000

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
EN50131 Compliant installations
1. The TL280R, TL280 module is monitored by the control
panel and it is programmed via the programming menu (* 8, sec-
tion [851] in the control panel. The interface is connected to the
PC-Link bus as shown in the diagram included in this manual.
2. The Ethernet port is protected against surge transients up to
2.5kV and it is immune to conducted and radiated RF fields with
levels up to 10V/m as tested per EN50130-4 Standard.
3. The TL280R, TL280 module conforms with radiated emis-
sions levels for Class B equipment as per standards EN61000-6-
3/EN55022/CISPR22.
4. The TL280R, TL280 module uses AES128 encryption and
heartbeat supervision for both the Ethernet communication path
and it meets security levels S2 as per EN50136-2-1 (EN50131-
1). It also uses authentication for each message exchanged with
the compatible receiver equipment at ARC and it meets level I2
for information security.
5. The TL280R, TL280 module has only one communication
path: Ethernet 10/100BaseT using Internet/Intranet network.
TL280 and TL280R have been certified by Telefication in accor-
dance with EN50131-1 requirements for Grade 2, Class II and
ATS Class 3,4,5.
2 9 0 0 8 9 3 9 R0 0 1