Dell Precision 690 Guía De Referencia Rápida página 23

1 secondary processor connector (CPU_1)
2 front fan connector (FAN_FRONT)
3 card cage fan connector (FAN_CCAG)
4 internal speaker connector (INT_SPKR)
5 power connector (POWER2)
6 IDE drive connector (IDE)
7 password jumper (PSWD)
8 auxiliary hard-drive LED connector
(AUX_LED)
9 battery socket (BATTERY)
10 SATA connectors
(SATA_0, SATA_1, SATA_2)
11 RTC reset jumper (RTCRST)
12 main power connector (POWER1)
13 hard drive connector (HDD_3)
14 hard drive connector (HDD_2)
15 hard drive connector (HDD_1)
16 hard drive connector (HDD_0)
17 hard drive fan (FAN_HDD)
18 FlexBay connector (USB)
19 floppy drive (DSKT)
20 front panel connector (FRONTPANEL)
21 front panel 1394 connector (FP1394)
22 chassis intrusion header (INTRUDER)
23 PCI-Express x8 card slot, wired as x4
(SLOT7_PCIE)
24 PCI-X card slot (SLOT6_PCIX)
25 PCI-X card slot (SLOT5_PCIX)
26 PCI card slot (SLOT4_PCI)
NOTE:
This slot is not available in the dual-
graphics configuration
27 PCI-Express x8 card slot, wired as x4
(SLOT3_PCIE)
NOTE:
In the dual-graphics configuration, this slot
is replaced by a x16 slot on the graphics riser.
It holds a graphic card.
28 PCI-Express x16 card slot (SLOT2_PCIE)
NOTE:
This slot is not available in the dual-
graphics configuration
29 PCI-Express x8 card slot, wired as x4
(SLOT1_PCIE)
NOTE:
In the dual-graphics configuration, this slot
is replaced by a x16 slot on the graphics riser. It
holds a graphics card.
30 memory fan connector (FAN_MEM)
31 white memory module connectors (DIMM_1-4)
support memory modules or memory module
risers
32 black memory module connectors (DIMM_5-8)
support memory modules only when no memory
riser cards are installed; otherwise these must be
left empty
33 primary processor connector (CPU_0)
Quick Reference Guide
23