Install The Handles - Kohler K-7302 Guia De Instalacion

Escutcheon
Round-Head
Cap Screw
Valve
Bodies
Button
Handle
Cap
Socket-Head
Screw
Skirt
1/8" (3 mm)
Escutcheon

3. Install the Handles

NOTE: Illustration shows one of the available handle styles. All
handle styles follow the steps below.
NOTE: Install lever handles so they are parallel to the floor
(horizontal) when in the OFF position.
Assemble the handles, screws, and button caps to the valve
bodies.
If either handle touches the escutcheon, adjust the escutcheon for
a minimum 1/8" (3 mm) clearance between the handle skirt and
escutcheon.
Tighten the two screws on the valve yoke at the back of the
lavatory to secure the valve body.
Kohler Co.
Button
Cap
Valve
Yoke
5
Screw
111290-2-BC