Install The Handles - Kohler K-T16236 Guia De Instalacion

Setscrew
Plug Button
Plug Button
Setscrew
Stem Extension

3. Install the Handles

Apply a bead of plumbers putty or other sealant around the
bottom of each adapter according to the sealant manufacturer's
instructions.
Thread an adapter onto each valve.
Install a stem extension onto each valve, then securely tighten
with a screw.
NOTE: For lever handle assemblies: The lever handle must point
away from the spout when in the closed position.
With the setscrew hole facing toward the wall, fit a handle
assembly over each valve.
Tighten each handle assembly in place with a setscrew.
Press a plug button over each setscrew.
Remove any excess plumbers putty or sealant.
Kohler Co.
Cross Handle Assembly
Lever Handle Assembly
Screw
Adapter
Valve
5 1054811-2-B