Parent Unit - Chicco Top Digital Video Baby Monitor Manual De Instrucciones

11. Baby Unit power connector
12. Alkaline battery status indicator
light:
(a) Flashing red: alkaline batteries al-
most flat
(b) OFF: alkaline batteries charged or
operation via mains adapter (1)
13. Audio input
(16b) volume adjustment buttons
17. Display
sounds coming from the parent unit in
mode.

1.2 Parent unit

V 1800 mAh lithium-ion battery or via
100-240 V ~ 50/60 Hz /6.5V 550 mA
switching mains adapter
mode
emitted by the child:
Illuminates progressively from the
centre outward, indicating 3 levels of
sound intensity coming from the Baby
Unit microphone (6)
Allows parents to monitor sounds
emitted by the child even when the
parent unit loudspeaker volume is
switched off.
emitted by the child are of a rela-
tively low intensity.
by the child are of medium intensity.
by the child are of a relatively high
intensity.
see a real-time image of the child and
manage the internal menu
(5b) volume adjustment buttons
6. Built-in speaker to reproduce the
sounds emitted by the child in Baby
functions at the same time:
a) Absence or loss of link between child
10 seconds after the power and link in-
dicator light starts to flash green, you
will hear 2 consecutive beeps per sec-
ond. As soon as the link with the Baby
Unit is restored, the signal switches off
and the power and link indicator light
will light up steady green.
status almost flat signal function: you
will hear 1 beep per second and the
rechargeable battery status indicator
light will start to flash red.
lithium-ion battery begins, the beep
switches off and the rechargeable
battery status indicator light lights up
steady red until charging is complete.
7. Video recording button
(a) Steady green: linked with Baby Unit
23