Belkin F5D7230-4 Manual Del Usuario página 22

Connecting and Configuring your Router Connecting and Configuring your Router
Step 5 Configure the Router
The Wizard will now transfer all of the configuration information to the
Router. This will take approximately one minute. During this time, do
not turn off the Router or computer. The Router will restart itself at the
end of this step.
5.1 Checking Internet
The Wizard will now check for an
Internet connection. This can take
a few minutes. The Wizard may not
detect a connection right away. If
not, it will retry a number of times.
The "Connected" light on the front
panel of the Router will flash during
this time. Please be patient through
this process.
5.2 Finished
When the Internet connection
is complete, the Wizard will tell
you that you are finished. The
"Connected" LED on the front of
the Router will be solid GREEN,
indicating that the Router is now
connected to the Internet.
20 20