Pantech Jest 2 Guia Del Usuario página 37

2. Say "My Verizon".
3. Your phone will make a web connection.
HELP
Use the Help command to view how to use the Voice Commands.
1. You will hear Please say a command
displayed.
2. Say "Help".
3. The Help guide will be displayed on your phone.
VOICE COMMANDS SETTINGS
CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat
your voice command. If it does not recognize the name or number, it will display a
list of up to three choices and speak each one in turn. You can control how often the
phone asks you to confirm the recognized name or number.
1. Slide the phone up, press the
9. Settings & Tools, 3. Tools,
To view information about each option, press the Left Soft Key
2. Press the Right Soft Key
Shortcut: From idle mode, press the Voice Commands Key to access the Voice
Commands menu and press the Right Soft Key
3. Select Automatic, Always Confirm
Key.
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages
NOT RECOGNIZED Try again?", adjust the sensitivity toward
70
and the Voice Commands menu will be
Key [MENU], then press
1. Voice Commands.
[Info].
[Settings] and then press 1. Confirm Choices.
[Settings].
or Never Confirm, then press the
"Please try again" or "COMMAND
Less Sensitive. If
you frequently experience false activations (when the phone recognizes a name you
didn't say), adjust the sensitivity toward More
1. Slide the phone up, press the Key [MENU], then press
9. Settings & Tools, 3. Tools, 1. Voice
2. Press the Right Soft Key [Settings] and then press
More Sensitive, Automatic
3. Select or
ADAPT VOICE
Voice Commands are speaker independent, which means that no training or adaptation
is required. Some users with heavy accents or unusual voice characteristics may find
difficulty in achieving high accuracy with speaker independent Voice Commands, so
the Adapt Voice feature allows users to dramatically improve the recognition accuracy
after adapting their voices. Users who get acceptable recognition accuracy will find no
additional benefit to performing the Adapt Voice feature.
1. Slide the phone up, press the Key [MENU], then press
9. Settings & Tools, 3. Tools, 1. Voice
2. Press the Right Soft Key [Settings] and then press
3. Select 1. Train Voice then press the
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
4. "Adaptation will take a couple of minutes to complete. Adapt in a
quiet room. Press OK to begin." will appear on the screen. Press the
Key. Wait for the beep, and then repeat the sentences using a normal tone
of voice.
5. When you are finished with a full session, you will reach a screen that reads
Complete".
"Adaptation
PROMPTS
Allows you to select voice command system characteristics.
1. Slide the phone up, press the Key [MENU], then press
9. Settings & Tools, 3. Tools, 1. Voice
Sensitive.
Commands.
2. Sensitivity.
Less Sensitive, then press the
Key.
Commands.
3. Adapt Voice.
Key.
Commands.
01 01
02 02
03 03
04 04
05 05
06 06
07 07
71 70