Ec Declaration Of Conformity - Vimar Elvox ACTO 510A Manual Para El Conexionado Y El Uso

ACTO
(Declaration of incorporation of partly completed machinery annex IIB 2006/42/EC)
The undersigned, representing the following manufacturer
herewith declares that the products
ACTUATORS FOR GATES WITH SLIDING DOORS - SERIES ACTO
Articles
Trade Mark Type ref. Cat. ref.
Elvox ACTO510A ESM8
Elvox
ACTO810A ESM9
are in conformity with the provisions of the following EC directive(s) (including all applicable amendments) and that
the following standards and/or technical specifications have been applied
Machinery Directive 2006/42/EC
LV Directive 2006/95/EC:
EMC Directive 2004/108/EC:
R&TTE Directive 1999/5/EC:
Further hereby declares that the product must not be put into service until the final machinery into which it is to
be incorporated has been declared in conformity with the provisions of Directive 2006/42/EC, where appropriate.
Declares that the relevant technical documentation is compiled by Vimar SpA and in accordance with part B of An-
nex VII of Directive 2006/42/EC and the following essential requirements of this Directive are applied and fulfilled:
1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2, 1.5.1,
1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.6.1, 1.6.2, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
I undertake to make available, in response to a reasoned request by the national authorities, any further supporting
product documents they require.
Marostica, 14/01/2016
Note: The contents of this declaration correspond to what declared in the last revision of the official declaration available before printing this manual. The text herein has been
re-edited for editorial purposes. A copy of the original declaration can be requested to Vimar SpA
EN

EC DECLARATION OF CONFORMITY

No. : ZDT00643.00
Description
ACTO 510A non-reversible 230 V~ electromechanical operator for sliding gates up to 500 kg, residential and
apartment block use, electronic control card, 433 MHz radio receiver, magnetic encoder, magnetic limit switches,
complete with fixing plate
ACTO 810A non-reversible 230 V~ electromechanical operator for sliding gates up to 800 kg, tertiary and
industrial use, electronic control card, 433 MHz radio receiver, magnetic encoder, magnetic limit switches,
complete with fixing plate
EN 60335-2-103 (2003) + A11 (2009)
EN 61000-6-1 (2007), EN 61000-6-3 (2007) + A11 (2011)
EN 300 220-2 (2012), EN 301 489-3 (2013)
Vimar SpA
Viale Vicenza, 14 - 36063 Marostica (VI) Italy
The Managing Director
13