Graco 4EVER EXTEND2FIT Manual De Instrucciones página 47

Review your vehicle's owner manual for vehicle seat belt use
7. Route the Vehicle Seat Belt
Thread vehicle seat belt through the rear-
facing belt path (marked with a blue label)
and out the other side. Buckle it. The seat
belt should lie as flat as possible and not be
twisted.
Note: It may be easier to route the vehicle
seat belt by lifting seat pad up to expose the
belt path.
Make sure the vehicle seat belt is in front of
the buckle strap when the buckle is in the
inner-most position, and in behind when in
the outer-most position.
8. Lock Vehicle Seat Belt
In most vehicles today, slowly pull the
shoulder belt all the way out and then let it
go back in. You will hear a clicking sound.
Slowly pull out on the belt and it should
be locked. If not, review your car's owner
manual and section 9-D.
47