Nokia 7705 Twist Manual Del Usuario página 47

6. Select one of the following settings, then press the
Phone Only — Allows you to edit the lock code for Security. (The default lock code is the last 4 digits of your mobile
number.)
Calls & Services — Allows you to edit the lock code for Restrictions. (The default lock code is the last 4 digits of your
mobile number.)
7. If Phone Only is selected, enter the new four-digit code in the
again in the Re-enter New Code:
8. If Calls & Services is selected, enter the current lock code in the
in the Enter New Code: field. Enter the new four-digit code again in the
Key.
Restrictions
Use the following procedure to configure Location Setting, Calls and Messages restrictions.
1. Swivel open the phone to reveal the full QWERTY keypad.
2. From Idle Mode, press the
3. Press Phone Settings, and press
4. Enter the four-digit lock code, then press the
5. Press Restrictions.
6. Enter the four-digit lock code again, then press the
7. Select one of the following settings:
Location Setting — Unlock Setting
Calls — Incoming Calls
• For Incoming Calls, set
• For Outgoing Calls, set
Messages — Incoming Messages
• For Incoming Messages, set
• For Outgoing Messages, set
Dial-Up Modem — Allow
8. Press the Key.
Phone Lock Setting
This setting specifies whether the phone should be locked whenever it is turned on. Lock Mode prevents the unauthorized
use of your phone. Once the phone is locked, it is in restricted mode until the lock code is entered. You can still make
emergency calls.
1. Swivel open the phone to reveal the full QWERTY keypad.
2. From Idle Mode, press the
3. Press Phone Settings, and press
4. Enter the four-digit lock code, then press the
5. Press Phone Lock
6. Select one of the following settings, then press the
Unlocked — Phone is unlocked.
On Power Up — Phone will lock when it is turned on.
Lock Phone Now
Lock the phone now.
1. Swivel open the phone to reveal the full QWERTY keypad.
2. From Idle Mode, press the
3. Press Phone Settings, and press
4. Enter the four-digit lock code, then press the
field to confirm your input, then press the
Key (MENU), and press
Security.
or Lock Setting.
or Outgoing Calls.
Allow All, Contacts Only
Allow All, Contacts Only
or Outgoing Messages.
Allow All or Block
Allow All or Block
or Block.
Key (MENU), and press
Security.
Setting.
Key (MENU), and press
Security.
Key.
Enter New Code:
Enter Current Code:
Re-enter New Code:
Settings & Tools.
Key. The default lock code is the last 4 digits of your mobile number.
Key.
or Block All.
or Block All.
All.
All.
Settings & Tools.
Key. The default lock code is the last 4 digits of your mobile number.
Key.
Settings & Tools.
Key. The default lock code is the last 4 digits of your mobile number.
P h o n e S e t t i n g s
field. Enter the new four-digit code
Key.
field. Enter the new four-digit code
field, then press the
46
Settings