Connecting The Camera; Direct Printing (Pictbridge) - Olympus FE-120 Manual Básico

CONNECTING THE CAMERA

Direct printing (PictBridge)

Using the provided USB cable, you may connect your camera directly to a
PictBridge compatible printer such as the Olympus P-11 to make prints.
1 Connect one end of the provided USB cable into the camera's
USB connector and the other end into the printer's USB
connector.
2 Select [PRINT] on the camera's
monitor and press Z.
After the [ONE MOMENT] screen closes, the
camera and printer are connected.
USB
P C
PRINT
EXIT
SELECT GO
OK
En
19