Self Timer; Flash Modes - Olympus FE-120 Manual Básico

Press bY.
1
The self-timer settings screen is displayed.
•
Select [ON], and press Z.
2
3 Press the shutter button fully to take the
picture.
The self-timer lamp lights for approximately 10
•
seconds after the shutter button is pressed, then starts blinking. After
En
blinking for approximately 2 seconds, the picture is taken.
Press d#.
1
The flash mode setting screen is displayed.
•
Press a/c to select the flash mode, and press Z.
2
3 Press the shutter button halfway.
When the flash is set to fire, the
•
4 Press the shutter button fully to take the picture.
Flash working range:
W (max.) : Approx. 0.2 m to 3.7 m (0.7 ft. to 12.1 ft.)
T (max.) : Approx. 0.6 m to 2.1 m (2.0 ft. to 6.9 ft.)
Icon
No
indication
!
#
$
14

Self timer

Flash modes

Flash mode
Auto flash
Red-eye-reduction
flash
Fill-in flash
Flash off
#
mark lights steadily.
Description
The flash fires automatically in low light
or backlight conditions.
The red-eye reduction flash mode
significantly reduces this phenomenon by
emitting pre-flashes before firing the
regular flash.
The flash fires regardless of the available
light.
The flash does not fire even in low light
conditions.
Self-timer lamp