How To Enable Modo Use With Home Automation Bus (Iperbus); How To Assign Names To Scenarios - Urmet 1717/12H Manual De Instrucciones

1.1 HOW TO ENABLE MODO USE WITH HOME AUTOMATION
BUS (IPERBUS)
• Select to open the menu for enabling and disabling the IPerBus home automation bus. The following
page will appear when the bus is enabled by selecting the ON icon. The devices connected to the
IPerBus bus can be controlled (scenario activation) and alarms and energy consumptions from the
devices connected to the bus can be displayed in way.
• Select to assign names to the scenarios.
• Select to set which alarms detected by IPerBus and shown on MODO must also be sent to the
concierge switchboard (see the dedicated paragraph).
• Icons will not be shown if the bus is set to OFF.
A supplementary ringer connected to the S+/S- terminals cannot be used if the bus is set to ON.
available (see system diagrams).

1.2 HOW TO ASSIGN NAMES TO SCENARIOS

Select
default. The
name assigned to a scenario in MODO is independent from the one assigned in IPerSet. However, we
suggest to use the same name on MODO and on IPerSet for the sake of clarity.
Example:
(called Scenario 1 by default).
If instead you want to call it RELAX
from Scenario 1 to RELAX.
In all cases, the position of a scenario in the MODO list allows to easily identify correspondence with
the IPerSet scenarios.
Unnamed scenarios have no effect in IPerBus.
Touch to scroll the scenario name list.
20
ON
BUS
SCENARIO 1
OFF
DS1717-008