How To Set Energy Consumption - Urmet 1717/12H Manual De Instrucciones

• The IPerBus alarms are associated to the icons as shown in the following table:
MODO icon

1.4 HOW TO SET ENERGY CONSUMPTION

In the settings menu
meter connected to IPerBus via a 1071/7 module, or connected locally to MODO directly to the Cp+/Cp-
terminals.
Pulse meters compliant with EN62053-31 or DIN43864 (with S0 optoinsulated output) must be used. (*)
• Select BUS to view the measurements of the pulse meters connected to IPerBus
• Select LOCAL if the pulse meter is connected directly to the Cp+/Cp- terminals of MODO.
• Select OFF if the function is not required.
(*) For example: Finder 7E23, model 7E23.8.230.000:
Eltako WSZ12DE-32A:
The higher the number of pulses per kWh, the better the resolution, i.e. the capacity by the pulse meter to discriminate
between small changes of consumption.
22
Name in IPerSet
Generic alarm
Intrusion alarm
Door open alarm
, select and then
LOCAL
ON
OFF
OFF
ON
ON
OFF
MODO icon
Alarms table
to set whether to read consumption using a pulse energy
BUS
OFF
BUS
1000 p/kWh
2000 p/kWh
Name in IPerSet
Fire alarm
Gas alarm
Water alarm
DS1717-008