Description Of The Appliance; Operating The Appliance; Switching The Outer Rings On And Off; Helpful Hints And Tips - Electrolux HM604060MB Manual De Instrucciones

Description of the appliance

Cooking surface layout
1
9
145
mm
8
120/210
mm
7
Residual heat indicator
The residual heat indicator comes on when a cooking zone is hot.
WARNING!
Risk of burns from residual heat!

Operating the appliance

You operate the hob with the knobs of the oven. The Operating Instructions chapter
for the oven tells how to operate the hob.
When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass
cooking zones and does not show that the appliance operates incorrectly.
/

Switching the outer rings on and off

You can match the effective heating surface to the size of the cookware.
To switch on the outer ring touch the sensor field
more outer rings touch the same sensor field again. The next indicator comes on.
Do the procedure again to switch off the outer ring. The indicator goes out.

Helpful hints and tips

Cookware
• The bottom of the cookware must be as thick and flat as possible.
• Cookware made of enamelled steel and with aluminium or copper bottoms can cause
discoloration on glass ceramic surface.
2
265 170
mm
mm
3
145
4
mm
6 5
Description of the appliance
1 Single cooking zone 1200 W
2 Multi-purpose zone 1500/2400 W
3 Residual heat indicators
4 Single cooking zone 1200 W
5 Multi-purpose zone switch with
indicator
6 Double cooking zone switch with in-
dicator
7 Double cooking zone 750/2200 W
8 Residual heat indicators
9 Steam outlet
/ . The indicator comes on. For
15