Timex IRONMAN 10 LAP Guia Del Usuario página 2

EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date
of purchase for $5... You can pay with AMEX, Discover, Visa or MasterCard by
calling 1 800-448-4639 during normal business hours... Payment must be made
within 30 days of purchase... Name, address, telephone number, purchase date,
and 5-digit model number required... You can also mail a check for $5 to: Timex
Extended Warranty, P...O... Box 1676, Dept... EF, Little Rock, AR 72203...
Please read instructions carefully to understand how to operate your Timex
watch... Your model may not have all of the features described in this
booklet.
FUNCTIONS
Real-time calendar clock, Second time zone, Countdown timer, Daily/weekday/
weekend alarm, Hourly chime, Chronograph with lap/split storage, INDIGLO
night-light with Night-Mode Feature...
®
BASIC OPERATION
SET/RECALL
OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to next
step)
SET/RECALL
OR DONE
(To save changes
and exit setting)
MODE OR NEXT
(Proceed to next
step)
START/SPLIT OR +
(Increase value... Hold to
increase rapidly)
When setting, each button has a different function as indicated above. Watch
face will indicate when button changes function...
TIME/DATE/HOURLY CHIME
1. In TIME mode, press and hold SET/RECALL. Time zone will flash.
2. To set, push + or – to select first or second time zone.
3. Press NEXT. Hour digits flash.
4... Press + or – to change hour including AM/PM... (Scroll through 12 hours to
get to AM/PM)...
5. Press NEXT. Minute digits flash.
6... Press + or – to change minutes...
7. Press NEXT. Second digits flash.
8... Press + or – to set seconds to zero...
9... Continue pattern to set month, day of month, year, 12-hour or 24-hour
time display, MM.DD or DD.MM date format, turn hourly CHIME on/off, turn
BEEP on/off. If you select BEEP on, a beep will sound every time you push
a button (except INDIGLO )...
®
10. Press DONE to confirm and exit or NEXT to continue and set second time
zone, if desired...
11... When in Time mode, press and hold START/SPLIT to "peek" at second time
zone; hold for 4 seconds to switch time zones...
CHRONO
®
1... Press MODE until CHRONO appears...
2... Press and hold SET/RECALL...
®
3... The Display will read: FORMAT/SET, then select LAP/SPL or SPL/LAP
options...
4... Press + or – to select desired format...
5. Press DONE to confirm and exit.
6... To use chrono, press START/SPLIT... Chrono continues to run even if you exit
the mode...
7... Press STOP/RESET to stop chronograph from running OR while chrono is
INDIGLO Button
®
running, press START/SPLIT to take a split... Lap and split times will then be
displayed in the format you selected... The lap number will alternate with the
START/SPLIT OR +
last two digits of the bottom line...
(Increase value... Hold to
NOTES:
increase rapidly)
STOP/RESET OR –
• Lap and split times will appear frozen for 10 seconds... Press MODE to
(Decrease value... Hold to
release the display and see running chrono...
decrease rapidly)
• While chronograph is running or stopped, press SET/RECALL, then press +
or – to scroll through stored laps or to recall stored laps/splits... Press SET/
RECALL again to return to running chronograph...
• Press and hold STOP/RESET to reset chronograph...
TIMER
1... Press MODE repeatedly until TIMER appears...
2. Press SET/RECALL. Hour digits flash.
INDIGLO Button
®
3... Follow same pattern as setting TIME and ALARM to set hours, minutes,
seconds, and select between REPEAT/AT END (timer counts down and then
repeats) or STOP/AT END (the timer counts down and then stops)...
4. Press DONE to confirm and exit.
5... Press START/SPLIT to start TIMER... Timer will continue to run even if you exit
STOP/RESET OR –
Timer mode... If REPEAT/END selected h will flash. If STOP/END selected H
(Decrease value... Hold to
will flash.
decrease rapidly)
6... An alarm melody will chime when the timer has reached zero or before it
starts to count down again...
7... Press STOP/RESET to stop TIMER... Press again to reset to countdown time...
ALARM
Setting the ALARM is similar to setting TIME...
1... Press MODE repeatedly until ALARM appears...
2... Press SET/RECALL to set alarm...
3. Hour digits flash. Press + or – to change hour.
4. Press NEXT. Minute digits flash. Press + or – to change minutes.
5. Press NEXT. If in 12-hour format, AM/PM flashes. Press + or – to change.
6... Press NEXT... Press + or – to select DAILY, WEEKDAYS OR WEEKENDS...
7. Press DONE to confirm and exit.
8... Press Start/Split or Stop/Reset to arm or disarm alarm... When disarmed, OFF
will be displayed... When armed, the alarm clock icon will appear t...
9... The INDIGLO
the alarm goes off. Press any button to silence. A back up alarm will sound
after five mintues if you don't press any buttons.
INDIGLO
Press INDIGLO
used in INDIGLO
light conditions... While the night-light is on pressing any button keeps it on for
three seconds...
Press and hold INDIGLO
feature... Moon icon P will appear... Once activated, any button pushed will cause
INDIGLO
1
LAP 1 = 7.11 LAP 2 = 7.50
SPLIT 1 = 7.11
SPLIT 2 = 15.01
night-light and alarm icon flashes and an alert sounds when
®
NIGHT-LIGHT/NIGHT MODE
®
button to activate night-light... Electroluminescent technology
®
night-light illuminates entire watch face at night and in low
®
button for 4 seconds to activate NIGHT-MODE
®
night-light to stay on for 3 seconds... NIGHT-MODE
®
098095000 098095000
ENGLISH ENGLISH
LAP 3 = 7.08 LAP 4 = 7.30
SPLIT 3 = 22.09
SPLIT 4 = 29.39
FEATURE
®
®
feature
®