Installing The Rack - Vimar Elvox ESM1 Manual Para El Conexionado Y El Uso

ACTO
N.B: Before securing the actuator, use a spirit level to check the positioning of the plate:
Before you start installing the rack, check the mechanical stops of the gate. If they are missing or not strong enough you need to install them (see Figure 6)

Installing the rack

If you are using the screw rack it is advisable to assemble the modules to verify that the mounting points do not line up with the movement of the wheels
(see Figure 7).
EN
Fig. 5
CAP
Fig. 6.1
FORK
FRONT VIEW OF GATE
STOP
Fig. 6.2
15