Auto Tare Function; Stability Filter - Gram S5i Serie Manual De Utilización

Ocultar thumbs Ver también para S5i Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

"AUt-t 0".
Use
to modify the value at the right of "1" to enable function.
Confirm pressing

Auto Tare Function

When display is showing zero and without any object over the plate, place the
empty recipient or box over the plate.
Scale will show zero and automatically will operate Tare function, showing
"0" value and turning on scale tare symbol on display.
Place the object in the box, and scale will show net weight. (Object weight).
If you remove all from the plate, scale will cancel tare and indicate again "0".
Now, we can do the same operation again with no limit. Scale will always
operates tare automatically still we unable this function.

Stability filter

In adverse environmental conditions, or when scale is used in instable
weightings, you can increase the weighting stability with filters.
To access this function, press
still display shows "fiLTEr". Press
digit on the right, in accordance with the following table:
filter 0 - Factory programming (for qualified personnel only)
filter 1 - Stable environments (fast response)
filter 2 - Not really stable environments (medium response speed)
28
and escape pressing
and display will show "PLU XX". Press
.
to confirm, and display will show a

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

S7i serie

Tabla de contenido