Kohler K-1737-K1 Guía De Instalación Y Cuidado página 17

Troubleshooting (cont.)
Symptoms Probable Causes
C. The user interface
"GEN TEST"
6. A. An error has
light is
blinking red.
"TEMP
7. A. The temperature
SENSOR" light
is blinking red.
B. The temperature
"DATA LINK"
8. A. A connection to the
light is
blinking red.
B. A connection to the
C. An error has
Kohler Co.
Recommended Action
C. Call the Customer
is damaged (green Care Center using
status light on the the information
steam generator is provided on the back
on). page of this manual.
A. Check the error code
occurred with the on the user interface.
steam generator. See the
corresponding error
code in this
document.
A. Connect the
sensor is not temperature sensor.
connected.
B. Call the Customer
sensor is damaged. Care Center using
the information
provided on the back
page of this manual.
A. Wait for the
controller has not connection to be
yet been made.
established.
B. Remove and reattach
controller cannot the cable that
be established. connects the adapter
to the controller.
Inspect the cable for
damage and replace
if necessary.
C1. Check the error code
occurred. on the user interface.
See the
corresponding error
code in this
document.
C2. Reset power to the
steam generator and
controller.
C3. Perform a system
reset on the user
interface.
17 1235393-2-C