Kohler K-76728 Guía De Instalación Y Cuidado página 6

1. Install the Support Framing and Bracket
NOTE: These instructions show one possible ceiling configuration.
Adapt to fit your application.
Using 2x4s, construct support framing to mount the bracket. The
face of each 2x4 should be installed flush with the face of the
ceiling joists.
Ensure that each corner of the bracket can be mounted to the
support framing with at least 2 screws.
CAUTION: Risk of personal injury. If the bracket is not
securely held in place during installation, the product may
fall causing personal injury.
Align the bracket so that its edges are parallel to the shower
walls. Orient the inlet pipe hole for the easiest connection to the
water supply.
Install the bracket with at least 2 #8 1-1/2" screws per corner.
Screws may be installed in any two of the four holes per corner.
1287911-2-B
Inlet Pipe
Hole
6 Kohler Co.