AKG MicroMic III Serie Modo De Empleo página 15

D 409
Fig. 2: Connecting to an unbalanced input.
2. Plug the female XLR connector (2) on the ex-
tension cable (1) into the male XLR connector
on the microphone cable.
3. Connect thje jack plug (3) on the extension
cable (1) to the desired microphone input jack
on your mixer or amplifier.
You can connect this version of the microphone to
any AKG bodypack transmitter with a mini XLR
input.
Refer to the manual of your bodypack transmitter.
2
XLR
2 Interfacing
1
3
Refer to fig. 2.
2.2 D 409 L
15